|
| Ducati Monster 620/750/900 Dark/695 Handlebar Risers 2002 - 2007 - SANDBLAST FINISH |
The risers are placed between the fork crown and the 7/8" handlebars to raise the bars up 1 1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. They are anodized to match the color of the stock bar mounts. Requires no change of any control cables, wiring, or hoses.
|
| |
| Item no. D103 |
| Today's Sale Price: $75.95 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 1996 Ducati 750 M Monster |
|
|
| 1997 Ducati 750 M Monster |
|
|
| 1998 Ducati 750 M Monster |
|
|
| 1999 Ducati 750 M Monster |
|
|
| 2000 Ducati 750 M Monster |
|
|
| 2001 Ducati 750 M Monster |
|
|
| 2002 Ducati 750 M Monster |
|
|
| 2002 Ducati 750 Monster Dark |
|
|
| 1994 Ducati 900 Monster |
|
|
| 1995 Ducati 900 Monster |
|
|
| 1996 Ducati 900 Monster |
|
|
| 1997 Ducati 900 Monster |
|
|
| 1998 Ducati 900 Monster |
|
|
| 1999 Ducati 900 Monster |
|
|
| 2000 Ducati 900 Monster |
|
|
| 2001 Ducati 900 Monster |
|
|
| 2002 Ducati 900 Monster |
|
|
| 2001 Ducati Monster 620 |
|
|
| 2002 Ducati Monster 620 |
|
|
| 2003 Ducati Monster 620 |
|
|
| 2004 Ducati Monster 620 |
|
|
| 2005 Ducati Monster 620 |
|
|
| 2006 Ducati Monster 695 |
|
|
| 2007 Ducati Monster 695 |
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Hi, Scott,
I see that the D103 risers will fit a Duck GT1000, but will they require longer clutch and brake lines, or any fiddling with the handlebar wiring?
Thanks,
Steve
|
| ANSWER: Hi Steve,
The D-103 risers will fit the GT1000 with no changes to the control cables or wiring.
Thank you,
Scott-GenMar |
|
| QUESTION: Do you have risers for the Monster 696? |
| ANSWER: Hi,
We currently do not offer risers for the 696. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: do you ship to Estonia? |
| ANSWER: We do ship to Estonia.
Thank you,
Scott-GenMar |
|
| QUESTION: You said 4-6 weeks for the Ducati 696, its now 6 months and still not available. Will you make risers for 696 or not? |
| ANSWER: Another riser company is trying to get a patent on their design. We have submitted our design to make sure there is no infringement. As soon as we get the go ahead, the risers will be released. As far as a time frame goes, I don't know.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 1998 Ducati Supersport will these risers fit my bike if not can you recommend anything. |
| ANSWER: Hi,
We currently do not offer a riser for the Supersport. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Can you please tell me if you have the handle bar risers for the 695 product no. D-103 in stock, and if so how long would it take to be posted to Australia.. |
| ANSWER: the D-103 risers are currently back ordered until late this week. Shipping to Australia is around 7 days.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these risers fit 2001 Ducati 750 Monster Dark and do you ship to Australia? |
| ANSWER: The D-103 risers will not fit the 01 750 Monster Dark. We do ship to Australia daily.
Thank you,
Scott-GenMar |
|
| QUESTION: I am looking for risers for my 2003 620ie Monster. I think your D103 product will do the job, with the min of fuss. The only concern I have is my handlebar fairing, standard fitting. Will the bars still clear.
Yours Aye Ron Fraser. From the Highlands of Scotland.
|
| ANSWER: You will not have any clearance issues with the D-103 risers on a 2003 Monster.
Thank you,
Scott-GenMar |
|
| QUESTION: have you reached a conclusion on the 696 ducati? |
| ANSWER: The D-103 risers will not work on the 696. We will have to design a bike specific riser. It will be around 4-6 weeks before they will be available.
Thank you,
Scott-Genmar |
|
| QUESTION: I took a chance and ordered the 695 risers for the new 696, in part based on your response below. Brought the bike home today and the risers arrived also (great timing). But looking at the risers (did not break them out of the blister pack), the holes seem to be parallel and the pattern on the 696 is a trapezoid. So guess I'll send them back, take the restocking hit and wait to see what you folks can come up with. Some you win and some you lose. |
| ANSWER: |
|
| QUESTION: Have you determined if your 695 risers will work on the 696? I suspect the 19mm back may be the real problem, clearing the tank. I take deliverry next week on a 696 and looked at older Monster bars (higher rise to the bend), but have not located a pair yet. Had your risers on a S4R, like them. |
| ANSWER: We have not had the opportunity to install our risers on the 696. It appears that they will fit but we like to do some testing before we release them.
Thank you,
Scott-Genmar |
|
| QUESTION: Will you be manufacturing risers for the 696 ? If yes when will they be available ? |
| ANSWER: We will look into the 696 risers in the next 2-3 weeks.
Thank you,
Scott-Genmar |
|
| QUESTION: It doesn't list my bike on the application chart, but i'm assuming it will fit a 2006 monster 620. Right? |
| ANSWER: The D-103 risers will fit the monster 620.
Thank you,
Scott-GenMar |
|
| QUESTION: I just wanna know if i order one item. Really I order one or a pair of items. |
| ANSWER: Hi,
We only ship our risers in complete sets.
Thank you,
Scott-genmar |
|
| QUESTION: I just got a 2008 Monster 695...I believe it's exactly the same as the 2007...will these risers fit my bike with no cable modifications? thanks |
| ANSWER: Hi,
The D-103 risers will fit on the 08 695.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 02 Ducati 620i from what I see on your web page the D103 is the correct riser to order and no new cables are required. |
| ANSWER: Hi,
The D-103 risers are correct for the 2002 620i and no changes to the control cables are required.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: How much it will cost to send the risers to Portugal? |
| ANSWER: |
|
| QUESTION: Hi,
Three questions please;
1)the installation instructions show two styles of riser, an "up" and an "up-and-back", which one design fits a 2007 Monster 695?
2)Please confirm the raise-and-back figures.
3)Please confirm that the risers are anodized black.
Many thanks, Bjorn. |
| ANSWER: Hi,
We currently only carry the D-103 risers for the 07 695. They will raise the up 1 1/4" and back almost 3/4" due to the angle they come up on. The risers for the 07 695 are black. You will want to make sure to order part # D-103 BLK .
Thank you,
Scott-Genmar |
|
| QUESTION: Will these risers fit a 2006 multistrada 620?
|
| ANSWER: Hi,
The D-103 risers will not work on the 06 Multistrada 620. The bolt hole spacing is different.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: I have recently purchased a 2007 Ducati 1000 GT. Will any of your risers work on this bike. |
| ANSWER: Hi,
Our D-103 risers will work on the new GT1000. We offer them in a polished finish to match the triple-clamp. No changes to the control cables are necessary.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi, Will these risers fit the new 2007 Ducati Monster 695 without any modifications to the control cables? Thanks |
| ANSWER: You will not have to change any of the cables on the 07 Monster 695. It is a simple bolt-on installation.
Thank you,
Scott-GenMar |
|
| QUESTION: i have a monster 695 de 2006.
their no problems with the cable ? no need extend ???
can you send to portugal?
thank you
duarte.mousinho |
| ANSWER: Hi,
You will not need to change or re-route any of the cables on the Monster 695 when using our D-103 risers. We do ship to Portugal daily.
Thanks for the inquiry,
Scott-GEnMar |
|
| QUESTION: wow that was stinkin Fast, If I choose the 3/4 " what is
the cost and est turnaround time and how would I order
them ?. I am in Ohio and I still have 25F and Ice in my
Drive way so I dont need then today !! I am fairly small
and fit the Monster pretty well, but alittle more height
may be just Right, Thanks again Mark |
| ANSWER: Hi Mark,
The cost of the 3/4" riser would be the same as the D-103. Turnaround time would be 4-5 days. You will need to contact GenMar directly at 877-471-1515.
Thank you,
Scott-GenMar |
|
| QUESTION: Greetings , in regard to the D-103 for an 05 620M, do hoses need to be removed or rerouted for install. also does GenMar offer any other heights say 3/4" ? Gratzie e Ciao Mark |
| ANSWER: Hi Mark,
You will not have to re-route or lengthen any of the control cables on the 05 Monster 620M. We can make a shorter version of the D-103 risers. 3/4" would be the shortest we could go.
Thank you,
Scott-GenMar |
|
| QUESTION: Do you offer a riser for a 1999 Daytona 955i clip on. I am turning it into a naked bike and I wanted to raise the bar about an inch. Let me know if you have anything like that. |
| ANSWER: Hi,
We currently do not offer a riser for the 955i. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will this riser fit an S2R 1000 2006 Model? |
| ANSWER: Hi,
You will want to order our part # D-100 for the 06 S2R1000. The bars are larger in diameter at the clamps on the S2R and require a different riser than the monsters. The dimenstions for the D-103 and D-100 are the same. Just the hole for the handlebar is bigger on the D-100.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these risers fit the new GT1000? Are they available in the same polished finish as the OEM risers? Will all the cables have sufficient slack to accomodate the increased height? Thank you. |
| ANSWER: Hi,
We haven't had a chance to put the D-103 risers on the GT1000. The specs look like they will but we need to confirm it. You might check back with us in a couple of weeks.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I see that your product will fit my bike, '03 Ducati Monster 620 i.e.. But I just want to make sure that it requires no extension of the brake lines or other cables. Thank you for reply.
Christopher Dimler |
| ANSWER: Hi Christopher,
You will not have to change or lengthen any of the control cables. It is a simple, straight forward installation.
Thank you,
Scott-GenMar |
|
| QUESTION: will these risers fit 2005 ducati s2r ? |
| ANSWER: You will need our part # D-100 for the S2R. They raise the bars the same amount as the D-103s but will fit the 1 1/8" bars on the S2R. |
|
| QUESTION: Hi, Will these risers fit the new 2007 Ducati Monster 695? Thanks |
| ANSWER: The D-103 risers will fit the 2007 695. |
|
| QUESTION: Will this riser fit a 2006 Ducati 620 Dark? |
| ANSWER: The D-103 will fit the 06 620 Dark without any modifications to the control cables. |
|
| QUESTION: Will these risers fit a 2002 Ducati ST2? |
| ANSWER: We currently do not carry a model that will fit the ST2. |
|
| QUESTION: Do you make handlebar risers for the MV Agusta F41000? |
| ANSWER: We currently do not offer a riser for the MV Agusta. |
|
| QUESTION: Will these risers fit a 2005 or 2006 Ducati Multistrada 620? |
| ANSWER: The bolt pattern and bars are slightly different on the Multistrada so the D-103s will not fit. We do have plans to make risers for the Multistrada this fall of 2006. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by seo company